Materials used<\/h6>\n\n- Worbla’s Transpa Art (WTA) Thermoplastic Modelling & Moulding Sheet – 180mm x 250mm x 0.8mm<\/a><\/li>\n
- Tsukineko StazOn Solvent Ink Pad – Ultramarine<\/a><\/li>\n
- Tsukineko StazOn Midi Ink Pad – Teal Blue<\/a><\/li>\n
- Buddly Crafts Small Metal Beads – 36pcs Silver Tone<\/a><\/li>\n
- Buddly Crafts 10mm Lobster Clasps – 40pcs – Silver Tone ST14<\/a><\/li>\n
- Silver Plated Jump Rings – 6mm 144pcs #1135<\/a><\/li>\n
- Buddly Crafts 8mm x 3mm Feather & Cord Crimping End Caps – 100pcs Silver Tone<\/a><\/li>\n
- Buddly Crafts 3mm x 4mm Fine Chain – 10m Silver Tone ST18<\/a><\/li>\n
- BuddlyCrafts 2mm Round Leather Thonging Cord x 1m – Black<\/a><\/li>\n
- Hobby & Crafting Fun Earrings – 35mm Kidney #2417<\/a><\/li>\n<\/ul>\n
<\/p>\n
Tools used<\/h6>\n\n- Heat gun<\/li>\n
- Round nose pliers<\/li>\n
- Sponge dauber<\/li>\n
- Twizers<\/li>\n
- Scissors<\/li>\n
- Piercing tool<\/li>\n<\/ul>\n
<\/p>\n
Using the sponge dauber lightly cover about 5x18cm surface of the Worbla transparent sheet with the StazOn Ultramarine and Tea blue colours. Cut the coloured piece.<\/p>\n
![\"Faux](\"https:\/\/thecraftsworld.com\/tcw\/wp-content\/uploads\/2017\/03\/faux_stones_necklace_worbla_step_1.jpg\")
<\/a><\/p>\n <\/p>\n
Heat well the cut piece of Worbla and wrap it to form a ball.<\/p>\n
![\"Faux](\"https:\/\/thecraftsworld.com\/tcw\/wp-content\/uploads\/2017\/03\/faux_stones_necklace_worbla_step_2.jpg\")
<\/a><\/p>\n <\/p>\n
Using a round rolling tool, flat a bit the Worbla ball and cut small pieces with a pair of scissors. Heat each piece and flatten further. Remember to heat before cutting the pieces as the Worbla will harden and become difficult to cut.<\/p>\n
![\"Faux](\"https:\/\/thecraftsworld.com\/tcw\/wp-content\/uploads\/2017\/03\/faux_stones_necklace_worbla_step_3.jpg\")
<\/a><\/p>\n <\/p>\n
Open holes with a piercing tools close to the edge on each of the flatten pieces. Place a jump ring with the round nose pliers.<\/p>\n
![\"Faux](\"https:\/\/thecraftsworld.com\/tcw\/wp-content\/uploads\/2017\/03\/faux_stones_necklace_worbla_step_4.jpg\")
<\/a><\/p>\n <\/p>\n
Lay the pieces and set them to the form that necklace should look. Add some chain on the pieces that need lay longer on the cord.<\/p>\n
![\"Faux](\"https:\/\/thecraftsworld.com\/tcw\/wp-content\/uploads\/2017\/03\/faux_stones_necklace_worbla_step_5.jpg\")
<\/a><\/p>\n <\/p>\n
Place the faux gemstones with metallic beads on the leather cord and set a clasp lobster and a cap end.<\/p>\n
<\/p>\n
Tools used<\/h6>\n\n- Heat gun<\/li>\n
- Round nose pliers<\/li>\n
- Sponge dauber<\/li>\n
- Twizers<\/li>\n
- Scissors<\/li>\n
- Piercing tool<\/li>\n<\/ul>\n
<\/p>\n
Using the sponge dauber lightly cover about 5x18cm surface of the Worbla transparent sheet with the StazOn Ultramarine and Tea blue colours. Cut the coloured piece.<\/p>\n
<\/a><\/p>\n <\/p>\n
Heat well the cut piece of Worbla and wrap it to form a ball.<\/p>\n
<\/a><\/p>\n <\/p>\n
Using a round rolling tool, flat a bit the Worbla ball and cut small pieces with a pair of scissors. Heat each piece and flatten further. Remember to heat before cutting the pieces as the Worbla will harden and become difficult to cut.<\/p>\n
<\/a><\/p>\n <\/p>\n
Open holes with a piercing tools close to the edge on each of the flatten pieces. Place a jump ring with the round nose pliers.<\/p>\n
<\/a><\/p>\n <\/p>\n
Lay the pieces and set them to the form that necklace should look. Add some chain on the pieces that need lay longer on the cord.<\/p>\n
<\/a><\/p>\n <\/p>\n
Place the faux gemstones with metallic beads on the leather cord and set a clasp lobster and a cap end.<\/p>\n
<\/p>\n
Using the sponge dauber lightly cover about 5x18cm surface of the Worbla transparent sheet with the StazOn Ultramarine and Tea blue colours. Cut the coloured piece.<\/p>\n
<\/p>\n Heat well the cut piece of Worbla and wrap it to form a ball.<\/p>\n <\/p>\n Using a round rolling tool, flat a bit the Worbla ball and cut small pieces with a pair of scissors. Heat each piece and flatten further. Remember to heat before cutting the pieces as the Worbla will harden and become difficult to cut.<\/p>\n <\/p>\n Open holes with a piercing tools close to the edge on each of the flatten pieces. Place a jump ring with the round nose pliers.<\/p>\n <\/p>\n Lay the pieces and set them to the form that necklace should look. Add some chain on the pieces that need lay longer on the cord.<\/p>\n <\/p>\n Place the faux gemstones with metallic beads on the leather cord and set a clasp lobster and a cap end.<\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n
![\"Faux](\"https:\/\/thecraftsworld.com\/tcw\/wp-content\/uploads\/2017\/03\/faux_stones_necklace_worbla_step_6.jpg\")
<\/a><\/p>\n![\"Faux](\"https:\/\/thecraftsworld.com\/tcw\/wp-content\/uploads\/2017\/03\/faux_stones_necklace_worbla.jpg\")
<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"